Inflatable Tub Ice Bath

Three length options (150 cm, 160 cm, 170 cm) suit different heights; the source notes it accommodates users up to 6’8″. All sizes share a 100 cm width and 70 cm wall height. Built-in ½” Water IN and Water OUT ports with watertight caps let you connect an electric chiller later without any modifications.

The insulated inflatable lid locks down with child-safety buckle straps to retain cold between uses. Fade-resistant Max/Min water level marks on the inner wall guide safe filling. A heavy-duty bottom drain with extendable hose directs water away cleanly during changes. The tub is equally suited to manual ice use or permanent chiller-connected operation indoors or outdoors.

• Drop-stitch dual-layer PVC inflates board-hard in approximately 2 minutes
• Three length options (150 cm, 160 cm, 170 cm) — fits users up to 6'8"
• 70 cm wall height contains water securely indoors and outdoors
• Built-in ½" Water IN and Water OUT ports for optional chiller connection without modification
• Insulated inflatable lid with child-safety buckle straps retains cold between uses
• Rated to ~136 kg (300 lb) occupant capacity
• Deflates and packs into included travel backpack for transport or storage
• Heavy-duty bottom drain with extendable hose for clean water changes
• Fade-resistant Max/Min water level marks on inner wall guide safe filling
• Suits manual ice use or permanent electric chiller connection

• Drain Valve
• Insulated Lid

Lead time is typically 3–7 business days from order confirmation, subject to stock availability. Delivery is kerbside; the package will be left at your address boundary or front door. The deflated tub ships in a single carton (shipping weight approximately 20 kg), which one person can manage. No crane or special access is required. Please ensure vehicle access to your delivery address. Contact us before ordering if you have restricted access (e.g. apartment building without lift).

Setup requires no tools and no trades. Place the deflated tub on a flat, level surface indoors or outdoors. Attach the pump to the inflation valve (pin up to inflate), inflate to the recommended 8 PSI — this takes approximately 2 minutes with the included pump. Fill with water to the Max level mark on the inner wall (approximately 390 L at 75% capacity).

To connect an electric chiller, thread the chiller hoses onto the ½" Water IN (green port) and Water OUT (red port) fittings. No plumbing modifications are required. The ports have watertight caps if a chiller is not used.

No electrical connection is needed for the tub itself. If a chiller is added, a standard 220 V / 50 Hz power outlet within reach of the chiller's power cord is required — refer to the chiller's specifications for circuit requirements.

The tub is covered by a 1-year warranty against manufacturing defects from the date of purchase. Normal wear and tear, misuse, and damage caused by improper inflation pressure or chemical exposure are not covered.

Cleaning
- After each use, wipe the inner wall with a clean cloth. For deeper cleaning, drain fully and rinse with fresh water.
- Use a mild, non-abrasive cleaner diluted in water. Avoid bleach, solvents, or harsh chemicals that can degrade the PVC.
- Clean the Water IN/OUT port threads and caps regularly to prevent mineral build-up.

Water Changes
- Change the water at least weekly with regular use, or sooner if it becomes cloudy or develops an odour.
- If using a chiller, follow the chiller manufacturer's guidelines on water treatment and change frequency.

Storage
- Before deflating for storage, drain completely and allow the interior to air-dry to prevent mildew.
- Deflate using the inflation valve, fold neatly, and store in the included travel backpack away from direct sunlight and sharp objects.
- Do not store while damp or in temperatures below 0 °C.

Repairs
- Use the included PVC patch kit and adhesive to repair minor punctures. Clean and dry the area before applying any patch.
- Check valve tightness periodically with the included valve wrench.