Wooden Barrel Ice Bath

The pine is sustainably sourced from Vietnam and finished with an eco-friendly oil stain that is skin-safe and free from harsh chemicals. No internal liner is needed, no synthetic sealants — just timber, steel, and water.

At 70 × 80 × 70 cm, it seats one person comfortably in a deep soak. Fill it hot for a traditional timber bath, or cold for a contrast plunge — pine handles both without issue. The centre-bottom floor drain makes emptying straightforward, and the included slatted wooden step makes getting in and out easy on any surface.

At 23 kg empty, two people can move and reposition it as needed. No installation or electrical connection is required.

• Stave-coopered construction — individual pine boards shaped and fitted together, bound with two steel hoops. No internal liner required.
• Eco-friendly oil finish — skin-safe, chemical-free oil stain applied throughout. No varnish or synthetic sealants.
• Sustainably sourced solid pine, Vietnamese origin.
• Centre-bottom floor drain compatible with standard 40 mm waste fittings — straightforward to empty.
• Included slatted wooden step for safe entry and exit.
• Works hot or cold — suitable as a hot soak or a cold plunge tub. Pine is stable across temperature ranges.
• Portable at 23 kg empty — two people can reposition it as needed.

• Drain Valve
• Entry Steps

Delivered to your door across Thailand. Lead times vary by location — contact us for an estimate to your area. For island delivery (e.g. Koh Samui), a ferry surcharge applies and will be confirmed at checkout.

Inspect the unit on arrival before signing off delivery. Any transit damage must be noted on the delivery docket at the time of receipt.

No installation is required. Place the tub on a level, water-tolerant surface and connect the floor drain to a 40 mm waste outlet, or position the tub over a suitable drainage area. Fill using a hose or buckets. The waste trap and pipework are not included and are available from any plumbing supplier.

First use: Fill and empty the tub once before your first proper soak. This allows the staves to tighten and any initial timber movement to settle. A small amount of seepage at the joins on the first fill is normal and stops within one or two fills as the pine swells.

No electrical or plumbing trade work is required.

Warranty terms are not stated in the supplier material. Please verify coverage and duration before listing.

After each use
- Rinse the interior with clean water.
- For a deeper clean, use a mild natural soap and a soft brush. Avoid harsh chemical cleaners — they will strip the oil finish and dry out the timber.

Oil finish maintenance
- Re-apply a food-safe or eco timber oil once or twice a year, or when the wood starts to look dry.
- Do not apply varnish or polyurethane over the existing finish — these are incompatible with the oil-stain base.

Outdoor use
- Re-apply an eco timber oil annually to slow weathering of the exterior.
- If the tub will sit unused for extended periods, empty it and cover it to prevent UV damage and drying out.

General
- Do not use chlorine-based or abrasive cleaners.
- Keep the drain clear of debris to ensure free drainage.