Inflatable 4 Person Ice Bath

The tub measures 200 cm across the outer diameter and 180 cm on the inner diameter, with 80 cm of wall height — enough depth for a seated full-body plunge. Pre-drilled water inlet and outlet ports with watertight caps let you run the tub with manual ice from day one, then connect an electric chiller later without any modification.

The insulated thermal lid clips shut with safety buckles to hold temperature when the tub is not in use. When you are done, the entire setup deflates and packs into the included heavy-duty carry bag for storage or transport.

• Drop-stitch PVC construction inflates to a rigid, hard-sided tub — no flex under full water load
• Large octagonal design: 200 cm outer diameter, 180 cm inner diameter, 80 cm depth
• Rated for up to 10 people — suitable for group or commercial use
• Pre-drilled water inlet and outlet ports with watertight caps for future chiller connection
• Insulated thermal lid with safety buckles seals in the cold between sessions
• Heavy-duty bottom drain valve directs waste water away cleanly
• Packs down into an included backpack-style carry bag for transport or storage
• Available in Grayish and Black finishes

• Carry / Storage Bag
• Drain Valve
• Inflation Pump
• Insulated Lid
• Repair / Patch Kit

Lead times are not specified in the supplier material — confirm current stock and dispatch timeframes at the time of order.

Delivery is kerbside unless otherwise arranged. The packed tub ships in a single bag/box and can typically be handled by one or two people. No crane or forklift access is required.

Ensure a clear path to the intended setup location before delivery. The deflated tub is bulky but manageable without specialist equipment.

Setup requires no tools and no trades. Unfold the tub on a flat, level surface indoors or outdoors. Use the included high-pressure pump (manual double-action or electric plug-in) to inflate the walls to the recommended PSI — the tub label shows the target pressure. Inflation typically takes 10–20 minutes with the manual pump, less with an electric pump.

Once inflated, connect a garden hose to fill the tub with water, then add ice or connect a chiller unit via the pre-drilled inlet and outlet ports. The coloured port labels (green = Water IN, red = Water OUT) identify the correct connections. No plumbing or electrical work is required for ice-only use. If adding an electric chiller, a standard single-phase power outlet within reach of the hose set is sufficient — no hardwiring needed.

Deflation and pack-down for storage or transport takes around 10–15 minutes.

1 year warranty. Does not include natural wear and tear and misuse.

Cleaning after each use
- Drain the tub fully via the drain valve and rinse the interior with fresh water.
- Wipe the interior surface with a mild, non-abrasive cleaner and rinse thoroughly. Avoid harsh solvents or bleach, which can degrade the PVC coating.
- Allow the tub to dry completely before deflating and packing away to prevent mould and mildew.

Water management
- Change the water regularly — weekly for frequent use, or sooner if the water becomes cloudy or develops an odour.
- If using a chiller, follow the chiller unit's maintenance schedule for filters and seals.

Inflation pressure
- Check and top up inflation pressure before each session if the tub has been stored deflated for an extended period.
- Do not over-inflate beyond the recommended PSI shown on the inflation valve label.

Storage
- Store deflated in the provided carry bag in a cool, dry location away from direct sunlight and sharp objects.
- Inspect the PVC surface for any small punctures before each use. Use the included repair/patch kit for minor damage.

What to avoid
- Sharp objects, pet claws, and abrasive surfaces near the tub walls.
- Leaving the tub filled and unattended in direct sunlight for extended periods, which accelerates UV degradation.
- Folding the tub tightly at the same crease points every time — vary the fold lines to reduce wear.